CLASSIC OIL FILTER
Filter media: 100% Micro-glass fiber
Support media: Polypropylene
Cartridge MOC: Polypropylene
‘O’ Ring/ Gaskets: Silicone/ EPDM
Double open end - DOE
Code 7S (226- double ‘O’ Ring / fin)
SINGLE CARTRIDGE FILTER HOUSING
Stainless steel cartridge filter housings are designed for high purity applications. All wetted surfaces are constructed of SS 316 / SS 304 and are mirror polished, providing excellent corrosion resistance. The housing comes in 10" to 40" cartridge sizes to meet the needs of your application. The housing can support both Double Open End (DOE) and Code-7 type cartridges. The design of the housing provides for positive seal with the filters thereby preventing fluid by pass.
HOUSING FEATURES & BENEFITS
| Stainless steel construction provides excellent corrosion protection for rugged, long-lasting service Housing drain allows full drainage of chambers for optimized filter change out. Provision for air venting before start-up for more efficient filter operation. Allows for use of both DOE or SOE cartridges Mirror polish finish eliminates possible contamination which could leach into the process chemicals. |
HOUSING SPECIFICATIONS
| MOC | SS304/
SS316/ SS316 L |
| Shell
dia | 100
mm |
| Length
of cartridge | 10" |
| Inlet/
Outlet | 1/2" BSP Socket |
| Vent/Drain | 1/4"
BSP |
| Finish | Mirror
polish |
| O-ring | Silicon/
EPDM/ Viton |
| Maximum
Operating Pressure | 10
Bar at 121°C |
FILTER FEATURES & BENEFITS
| High surface area filter media Exceptionally high flow rates with low pressure drops High permeability to air Can be operated at elevated temperatures Excellent wet strength for easy handling and filter integrity |
FILTER SPECIFICATIONS
| Micron
Rating | 1
Microns |
| Length | 250
mm |
| Inner
Dia | Approx
28mm |
| Outer
Dia | Approx
65-67 mm |
| Effective
surface area per 10” element | 7.5
sq. feet (0.6 msq.) |
| Max
operating temperature | 80˚C
continuous |
| Sterilization Autoclave Hot water | 121˚C,
30 min, 10 times 80˚C, 30 min, 30 times |
| Max
differential pressure | 5.5
bar (80 psi)@ 21˚C |
MICROGLASS
FIBER PLEATED FILTER CARTRIDGE
Micro-glass fiber Pleated filter cartridges are 100% synthetic glass fibers with or without binder that provides excellent strength in many liquid applications.
The support layers are standard polyester or polypropylene to suit temperature and compatibility requirements. Micro-glass fiber filter cartridges help to reduce filtration costs and premature clogging when filtering difficult-to-filter or highly contaminated solutions.
The filtration media combined with high flow rates and
high dirt-holding capacities is the ideal choice as a pre-filter in many
industries to increase the shelf life of the more expensive membrane filter
cartridges.